Note: This is a public test instance of Red Hat Bugzilla. The data contained within is a snapshot of the live data so any changes you make will not be reflected in the production Bugzilla. Email is disabled so feel free to test any aspect of the site that you want. File any problems you find or give feedback at
Bug 1883132 - grub2 crashes when booting on rk3399 devices
Summary: grub2 crashes when booting on rk3399 devices
Alias: None
Product: Fedora
Classification: Fedora
Component: grub2
Version: 33
Hardware: aarch64
OS: Unspecified
Target Milestone: ---
Assignee: Peter Jones
QA Contact: Fedora Extras Quality Assurance
Depends On:
Blocks: ARMTracker
TreeView+ depends on / blocked
Reported: 2020-09-28 06:53 UTC by Peter Robinson
Modified: 2020-10-03 12:40 UTC (History)
4 users (show)

Fixed In Version:
Doc Type: If docs needed, set a value
Doc Text:
Clone Of:
Last Closed: 2020-10-03 12:40:11 UTC
Type: Bug

Attachments (Terms of Use)

Description Peter Robinson 2020-09-28 06:53:05 UTC
When trying to boot on F-33 with recent grub2 on a rk3399 device such as a RockPro64 or Pinebook Pro I get the crash below. If I copy the /boot/efi/EFI/fedora/grubaa64.efi from a F-32 install it works fine.


U-Boot 2020.10-rc5 (Sep 22 2020 - 00:00:00 +0000)
SoC: Rockchip rk3399
Reset cause: POR
Model: Pine64 Pinebook Pro
DRAM:  3.9 GiB
PMIC:  RK808
MMC:   mmc@fe310000: 2, mmc@fe320000: 1, sdhci@fe330000: 0
Loading Environment from SPIFlash... Invalid bus 0 (err=-19)
*** Warning - spi_flash_probe_bus_cs() failed, using default environment
In:    serial
Out:   serial
Err:   serial
Model: Pine64 Pinebook Pro
Net:   No ethernet found.
Hit any key to stop autoboot:  0
Card did not respond to voltage select!
switch to partitions #0, OK
mmc1 is current device
Scanning mmc 1:1...
Found EFI removable media binary efi/fedora/grubaa64.efi
Found DTB mmc 1:2 /dtb/rockchip/rk3399-pinebook-pro.dtb
60174 bytes read in 13 ms (4.4 MiB/s)
Card did not respond to voltage select!
Scanning disk mmc...
Disk mmc not ready
Scanning disk mmc...
** Unrecognized filesystem type **
Card did not respond to voltage select!
Scanning disk sdhci...
Disk sdhci not ready
Found 4 disks
No EFI system partition
BootOrder not defined
EFI boot manager: Cannot load any image
2676208 bytes read in 289 ms (8.8 MiB/s)
Booting /efi\fedora\grubaa64.efi
"Synchronous Abort" handler, esr 0x96000004
elr: fffffffffcf5435c lr : fffffffffcf4fecc (reloc)
elr: 00000000f3c9735c lr : 00000000f3c92ecc
x0 : f1000401b59da621 x1 : 00000000f3c9d608
x2 : 000000000000000d x3 : 00000000f3c9d800
x4 : 00000000f3b080c0 x5 : 0000000000008650
x6 : 00000000f3b0d1c0 x7 : 0000000000000000
x8 : 0000000000000000 x9 : 0000000000000008
x10: 00000000f3f191c8 x11: 00000000f3f19220
x12: 00000000f3b216e0 x13: 00000000f4f27d50
x14: 00000000f6f43cb8 x15: 00000000f4f27d08
x16: 00000000f6f47be4 x17: 0000000000000001
x18: 0000000000000000 x19: 00000000f6f43b88
x20: 00000000f4f27e70 x21: 0000000002080000
x22: 000000000028d5f0 x23: 00000000f4f50a80
x24: 00000000f6ff4984 x25: 0000000000000000
x26: 0000000000000000 x27: 0000000000000000
x28: 00000000f4f51340 x29: 00000000f4f27d10

Code: f94003e0 91000400 f90003e0 f94007e0 (39400000) 
UEFI image [0x00000000f3c82000:0x00000000f3f0dfff] pc=0x1535c '/efi\fedora\grubaa64.efi'
Resetting CPU ...

resetting ...

Note You need to log in before you can comment on or make changes to this bug.