129931 – kernel is unable to probe usb 2 hardik connect to usb 1.1 system first tim it is plug in , the second time the usb harddisk is probe right

Note: This is a public test instance of Red Hat Bugzilla. The data contained within is a snapshot of the live data so any changes you make will not be reflected in the production Bugzilla. Email is disabled so feel free to test any aspect of the site that you want. File any problems you find or give feedback at bugzilla.redhat.com.

Bug 129931 - kernel is unable to probe usb 2 hardik connect to usb 1.1 system first tim it is plug in , the second time the usb harddisk is probe right

Summary: kernel is unable to probe usb 2 hardik connect to usb 1.1 system first tim it...

Keywords:
Status:	CLOSED WORKSFORME
Alias:	None
Product:	Fedora
Classification:	Fedora
Component:	kernel
Sub Component:
Version:	rawhide
Hardware:	All
OS:	Linux
Priority:	medium
Severity:	medium
Target Milestone:	---
Assignee:	Dave Jones
QA Contact:	Brian Brock
Docs Contact:
URL:
Whiteboard:
Depends On:
Blocks:	FCMETA_USB
TreeView+	depends on / blocked

Reported:	2004-08-14 17:33 UTC by Knut J BJuland
Modified:	2015-01-04 22:08 UTC (History)
CC List:	2 users (show)
Fixed In Version:
Doc Type:	Bug Fix
Doc Text:
Clone Of:
Environment:
Last Closed:	2005-11-12 08:30:07 UTC
Type:	---
Embargoed:
Dependent Products:

Attachments	(Terms of Use)

Description Knut J BJuland 2004-08-14 17:33:55 UTC

Description of problem:
When I boot with a freecom hardisk 80 mb my i815e syste is unable to
probe for the usb hard but mange to connect it when i unplu and replug it.

Version-Release number of selected component (if applicable):
kernel-2.6.8-1.520

How reproducible:
every time

Steps to Reproduce:
1.boot with freecom usb 2 hard
2.
3.
  
Actual results:
system is unable to probe an connect usb harddik

Expected results:
I should be able to mount the system as root.

Additional info:

50 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
divert: not allocating divert_blk for non-ethernet device lo
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
ICH2: IDE controller at PCI slot 0000:00:1f.1
ICH2: chipset revision 2
ICH2: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA
hda: Maxtor 5T020H2, ATA DISK drive
hdb: IC35L060AVER07-0, ATA DISK drive
Using cfq io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: LG CD-RW CED-8080B, ATAPI CD/DVD-ROM drive
hdd: Pioneer DVD-ROM ATAPIModel DVD-105S 012, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 39062500 sectors (20000 MB) w/2048KiB Cache, CHS=38752/16/63,
UDMA(100)
 hda: hda1 hda2 hda3 < hda5 hda6 >
hdb: max request size: 128KiB
hdb: 120103200 sectors (61492 MB) w/1916KiB Cache, CHS=65535/16/63,
UDMA(100)
 hdb: hdb1 hdb2
hdc: ATAPI 32X CD-ROM CD-R/RW drive, 2048kB Cache, DMA
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 40X DVD-ROM drive, 512kB Cache, UDMA(33)
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
input: Analog 3-axis 4-button joystick at pci0000:02:0c.1/gameport0
[TSC timer, 789 MHz clock, 902 ns res]
gameport: pci0000:02:0c.1 speed 1125 kHz
serio: i8042 AUX port at 0x60,0x64 irq 12
input: PS2++ Logitech Wheel Mouse on isa0060/serio1
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI: (supports S0 S1 S4 S5)
Freeing unused kernel memory: 136k freed
XFS mounting filesystem hdb2
Ending clean XFS mount for filesystem: hdb2
ACPI: Power Button (FF) [PWRF]
USB Universal Host Controller Interface driver v2.2
ACPI: PCI interrupt 0000:00:1f.2[D] -> GSI 10 (level, low) -> IRQ 10
uhci_hcd 0000:00:1f.2: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1f.2 to 64
uhci_hcd 0000:00:1f.2: irq 10, io base 0000ef80
uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1f.2: detected 2 ports
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: default language 0x0409
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.8-1.520custom uhci_hcd
usb usb1: SerialNumber: 0000:00:1f.2
usb usb1: hotplug
usb usb1: adding 1-0:1.0 (config #1, interface 0)
usb 1-0:1.0: hotplug
hub 1-0:1.0: usb_probe_interface
hub 1-0:1.0: usb_probe_interface - got id
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
hub 1-0:1.0: standalone hub
hub 1-0:1.0: no power switching (usb 1.0)
hub 1-0:1.0: individual port over-current protection
hub 1-0:1.0: power on to power good time: 2ms
hub 1-0:1.0: local power source is good
uhci_hcd 0000:00:1f.2: port 1 portsc 01a3
hub 1-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s
hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301
usb 1-1: new low speed USB device using address 2
usb 1-1: skipped 1 descriptor after interface
usb 1-1: new device strings: Mfr=1, Product=3, SerialNumber=0
usb 1-1: default language 0x0409
usb 1-1: Product: Microsoft 3-Button Mouse with IntelliEye(TM)
usb 1-1: Manufacturer: Microsoft
usb 1-1: hotplug
usb 1-1: adding 1-1:1.0 (config #1, interface 0)
usb 1-1:1.0: hotplug
usbhid 1-1:1.0: usb_probe_interface
usbhid 1-1:1.0: usb_probe_interface - got id
input: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with
IntelliEye(TM)] on usb-0000:00:1f.2-1
device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm.com
cdrom: open failed.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 1020088k swap on /dev/hdb1.  Priority:-1 extents:1
Adding 409616k swap on /dev/hda5.  Priority:-2 extents:1
parport0: PC-style at 0x378 [PCSPP,TRISTATE,EPP]
SCSI subsystem initialized
inserting floppy driver for 2.6.8-1.520custom
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
ACPI: PCI interrupt 0000:02:0a.0[A] -> GSI 3 (level, low) -> IRQ 3
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
0000:02:0a.0: 3Com PCI 3c905B Cyclone 100baseTx at 0xdc00. Vers LK1.1.19
divert: allocating divert_blk for eth0
divert: freeing divert_blk for eth0
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (3070 buckets, 24560 max) - 296 bytes per
conntrack
ACPI: PCI interrupt 0000:02:0a.0[A] -> GSI 3 (level, low) -> IRQ 3
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
0000:02:0a.0: 3Com PCI 3c905B Cyclone 100baseTx at 0xdc00. Vers LK1.1.19
divert: allocating divert_blk for eth0
Linux Kernel Card Services
  options:  [pci] [cardbus] [pm]
NET: Registered protocol family 10
Disabled Privacy Extensions on device 02368ae0(lo)
IPv6 over IPv4 tunneling driver
divert: not allocating divert_blk for non-ethernet device sit0
ACPI: PCI interrupt 0000:02:0c.0[A] -> GSI 9 (level, low) -> IRQ 9
eth0: no IPv6 routers present
parport0: PC-style at 0x378 [PCSPP,TRISTATE,EPP]
lp0: using parport0 (polling).
lp0: console ready
warning: process `update' used the obsolete bdflush system call
Fix your initscripts?
warning: process `update' used the obsolete bdflush system call
Fix your initscripts?
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11
NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module  1.0-6111  Tue Jul
27 07:55:38 PDT 2004
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
Linux video capture interface: v1.00
bttv: driver version 0.9.15 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
ACPI: PCI interrupt 0000:02:0b.0[A] -> GSI 11 (level, low) -> IRQ 11
bttv0: Bt878 (rev 17) at 0000:02:0b.0, irq: 11, latency: 64, mmio:
0xf47fe000
bttv0: detected: Pinnacle PCTV [card=39], PCI subsystem ID is 11bd:0012
bttv0: using: Pinnacle PCTV Studio/Rave [card=39,insmod option]
bttv0: gpio: en=00000000, out=00000000 in=00ff67ff [init]
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: miro: id=25 tuner=1 radio=no stereo=no
bttv0: using tuner=1
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
tuner: chip found at addr 0xc0 i2c-bus bt878 #0 [sw]
tuner: type set to 1 (Philips PAL_I (FI1246 and compatibles)) by bt878
#0 [sw]
tuner: type already set to 1, ignoring request for 5
tuner: The type=<n> insmod option will go away soon.
tuner: Please use the tuner=<n> option provided by
tuner: tv aard core driver (bttv, saa7134, ...) instead.
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: PLL: 28636363 => 35468950 .. ok
uhci_hcd 0000:00:1f.2: port 2 portsc 0093
hub 1-0:1.0: port 2, status 0101, change 0001, 12 Mb/s
hub 1-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101
usb 1-2: new full speed USB device using address 3
usb 1-2: new device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-2: default language 0x0409
usb 1-2: Product: FHD-Classic
usb 1-2: Manufacturer: Freecom Technologies
usb 1-2: SerialNumber: 100000000000000002927
usb 1-2: hotplug
usb 1-2: adding 1-2:1.0 (config #1, interface 0)
usb 1-2:1.0: hotplug
Initializing USB Mass Storage driver...
usb-storage 1-2:1.0: usb_probe_interface
usb-storage 1-2:1.0: usb_probe_interface - got id
atkbd.c: Keyboard on isa0060/serio0 reports too many keys pressed.
atkbd.c: Keyboard on isa0060/serio0 reports too many keys pressed.
atkbd.c: Keyboard on isa0060/serio0 reports too many keys pressed.
atkbd.c: Keyboard on isa0060/serio0 reports too many keys pressed.
atkbd.c: Keyboard on isa0060/serio0 reports too many keys pressed.
atkbd.c: Keyboard on isa0060/serio0 reports too many keys pressed.
atkbd.c: Keyboard on isa0060/serio0 reports too many keys pressed.
atkbd.c: Keyboard on isa0060/serio0 reports too many keys pressed.
atkbd.c: Keyboard on isa0060/serio0 reports too many keys pressed.
atkbd.c: Keyboard on isa0060/serio0 reports too many keys pressed.
atkbd.c: Keyboard on isa0060/serio0 reports too many keys pressed.
atkbd.c: Keyboard on isa0060/serio0 reports too many keys pressed.
atkbd.c: Keyboard on isa0060/serio0 reports too many keys pressed.
atkbd.c: Keyboard on isa0060/serio0 reports too many keys pressed.
atkbd.c: Keyboard on isa0060/serio0 reports too many keys pressed.
atkbd.c: Keyboard on isa0060/serio0 reports too many keys pressed.
atkbd.c: Keyboard on isa0060/serio0 reports too many keys pressed.
atkbd.c: Keyboard on isa0060/serio0 reports too many keys pressed.
atkbd.c: Keyboard on isa0060/serio0 reports too many keys pressed.
atkbd.c: Keyboard on isa0060/serio0 reports too many keys pressed.
atkbd.c: Keyboard on isa0060/serio0 reports too many keys pressed.
atkbd.c: Keyboard on isa0060/serio0 reports too many keys pressed.
atkbd.c: Keyboard on isa0060/serio0 reports too many keys pressed.
atkbd.c: Keyboard on isa0060/serio0 reports too many keys pressed.
atkbd.c: Keyboard on isa0060/serio0 reports too many keys pressed.
atkbd.c: Keyboard on isa0060/serio0 reports too many keys pressed.
atkbd.c: Keyboard on isa0060/serio0 reports too many keys pressed.
atkbd.c: Keyboard on isa0060/serio0 reports too many keys pressed.
atkbd.c: Keyboard on isa0060/serio0 reports too many keys pressed.
atkbd.c: Keyboard on isa0060/serio0 reports too many keys pressed.
input: AT Translated Set 2 keyboard on isa0060/serio0
usb 1-2: control timeout on ep0in
uhci_hcd 0000:00:1f.2: uhci_result_control: failed with status 440000
[19be32a0] link (17be31e2) element (172d51c0)
  0: [192d51c0] link (172d5200) e0 Stalled CRC/Timeo Length=7 MaxLen=7
DT0 EndPt=0 Dev=3, PID=2d(SETUP) (buf=0bb57a60)
  1: [192d5200] link (172d5240) e3 SPD Active Length=0 MaxLen=1 DT1
EndPt=0 Dev=3, PID=69(IN) (buf=17d29ce0)
  2: [192d5240] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1
EndPt=0 Dev=3, PID=e1(OUT) (buf=00000000)

uhci_hcd 0000:00:1f.2: uhci_result_control: failed with status 440000
[19be3270] link (17be31e2) element (172d5040)
  0: [192d5040] link (172d5080) e0 Stalled CRC/Timeo Length=7 MaxLen=7
DT0 EndPt=0 Dev=3, PID=2d(SETUP) (buf=0bb57a60)
  1: [192d5080] link (172d50c0) e3 SPD Active Length=0 MaxLen=3f DT1
EndPt=0 Dev=3, PID=69(IN) (buf=17d29ce0)
  2: [192d50c0] link (172d5100) e3 SPD Active Length=0 MaxLen=3f DT0
EndPt=0 Dev=3, PID=69(IN) (buf=17d29d20)
  3: [192d5100] link (172d5140) e3 SPD Active Length=0 MaxLen=3f DT1
EndPt=0 Dev=3, PID=69(IN) (buf=17d29d60)
  4: [192d5140] link (172d5180) e3 SPD Active Length=0 MaxLen=3e DT0
EndPt=0 Dev=3, PID=69(IN) (buf=17d29da0)
  5: [192d5180] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1
EndPt=0 Dev=3, PID=e1(OUT) (buf=00000000)

uhci_hcd 0000:00:1f.2: uhci_result_control: failed with status 440000
[19be32a0] link (17be31e2) element (172d51c0)
  0: [192d51c0] link (172d5200) e0 Stalled CRC/Timeo Length=7 MaxLen=7
DT0 EndPt=0 Dev=3, PID=2d(SETUP) (buf=0bb57a60)
  1: [192d5200] link (172d5240) e3 SPD Active Length=0 MaxLen=1 DT1
EndPt=0 Dev=3, PID=69(IN) (buf=17d29ce0)
  2: [192d5240] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1
EndPt=0 Dev=3, PID=e1(OUT) (buf=00000000)

uhci_hcd 0000:00:1f.2: uhci_result_control: failed with status 440000
[19be3270] link (17be31e2) element (172d5040)
  0: [192d5040] link (172d5080) e0 Stalled CRC/Timeo Length=7 MaxLen=7
DT0 EndPt=0 Dev=3, PID=2d(SETUP) (buf=0bb57a60)
  1: [192d5080] link (172d50c0) e3 SPD Active Length=0 MaxLen=3f DT1
EndPt=0 Dev=3, PID=69(IN) (buf=17d29ce0)
  2: [192d50c0] link (172d5100) e3 SPD Active Length=0 MaxLen=3f DT0
EndPt=0 Dev=3, PID=69(IN) (buf=17d29d20)
  3: [192d5100] link (172d5140) e3 SPD Active Length=0 MaxLen=3f DT1
EndPt=0 Dev=3, PID=69(IN) (buf=17d29d60)
  4: [192d5140] link (172d5180) e3 SPD Active Length=0 MaxLen=3e DT0
EndPt=0 Dev=3, PID=69(IN) (buf=17d29da0)
  5: [192d5180] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1
EndPt=0 Dev=3, PID=e1(OUT) (buf=00000000)

uhci_hcd 0000:00:1f.2: uhci_result_control: failed with status 440000
[19be32a0] link (17be31e2) element (172d51c0)
  0: [192d51c0] link (172d5200) e0 Stalled CRC/Timeo Length=7 MaxLen=7
DT0 EndPt=0 Dev=3, PID=2d(SETUP) (buf=0bb57a60)
  1: [192d5200] link (172d5240) e3 SPD Active Length=0 MaxLen=1 DT1
EndPt=0 Dev=3, PID=69(IN) (buf=17d29ce0)
  2: [192d5240] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1
EndPt=0 Dev=3, PID=e1(OUT) (buf=00000000)

uhci_hcd 0000:00:1f.2: uhci_result_control: failed with status 440000
[19be3270] link (17be31e2) element (172d5040)
  0: [192d5040] link (172d5080) e0 Stalled CRC/Timeo Length=7 MaxLen=7
DT0 EndPt=0 Dev=3, PID=2d(SETUP) (buf=17051040)
  1: [192d5080] link (172d50c0) e3 SPD Active Length=0 MaxLen=0 DT1
EndPt=0 Dev=3, PID=69(IN) (buf=17708180)
  2: [192d50c0] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1
EndPt=0 Dev=3, PID=e1(OUT) (buf=00000000)

usb-storage: probe of 1-2:1.0 failed with error -1
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
uhci_hcd 0000:00:1f.2: port 2 portsc 008a
hub 1-0:1.0: port 2, status 0100, change 0003, 12 Mb/s
usb 1-2: USB disconnect, address 3
usb 1-2: usb_disable_device nuking all URBs
usb 1-2: unregistering interface 1-2:1.0
usb 1-2:1.0: hotplug
usb 1-2: unregistering device
usb 1-2: hotplug
hub 1-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x100
uhci_hcd 0000:00:1f.2: port 2 portsc 0093
hub 1-0:1.0: port 2, status 0101, change 0001, 12 Mb/s
hub 1-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101
usb 1-2: new full speed USB device using address 4
usb 1-2: new device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-2: default language 0x0409
usb 1-2: Product: FHD-Classic
usb 1-2: Manufacturer: Freecom Technologies
usb 1-2: SerialNumber: 100000000000000002927
usb 1-2: hotplug
usb 1-2: adding 1-2:1.0 (config #1, interface 0)
usb 1-2:1.0: hotplug
usb-storage 1-2:1.0: usb_probe_interface
usb-storage 1-2:1.0: usb_probe_interface - got id
scsi0 : SCSI emulation for USB Mass Storage devices
  Vendor: HDS72258  Model: 0VLAT20           Rev: V32O
  Type:   Direct-Access                      ANSI SCSI revision: 02
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0,  type 0
USB Mass Storage device found at 4
SCSI device sda: 160836481 512-byte hdwr sectors (82348 MB)
sda: assuming drive cache: write through
 sda:Current sda: sense key No Sense
 sda1
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0

Comment 1 Dave Jones 2005-10-06 00:29:35 UTC

fixed in later kernels ?

Comment 2 Knut J BJuland 2005-11-12 08:30:07 UTC

It is fixed in later kernel

Note You need to log in before you can comment on or make changes to this bug.